咨询热线

13651969369

当前位置:首页   >  产品中心  >  二维材料  >  六方氮化硼晶体  >  Monolayer h-BN Solution 单层氮化硼溶液

Monolayer h-BN Solution 单层氮化硼溶液

简要描述:This product contains h-BN mono- and few-layer flakes solution in ethanol. The h-BN solution has been developed by ultrasonic treatment of h-BN high quality crystals synthesized through cubic anvil

  • 更新时间:2024-06-03
  • 产品型号:
  • 厂商性质:生产厂家
  • 访  问  量:849

详细介绍

This product contains h-BN mono- and few-layer flakes solution in ethanol. The h-BN solution has been developed by ultrasonic treatment of h-BN high quality crystals synthesized through cubic anvil device high pressure growth technique. Since the starting material h-BN is highly crystalline, ultrasonic treatment to delaminate h-BN layers yields highly crystalline h-BN mono-, few-, and some thick layers suspended in ethanol solution. The crystallinity of h-BN nanomaterials has been confirmed through electron energy dispersive spectroscopy (EDAX), Raman spectroscopy (FWHM<5 cm-1), and scanning electron microscopy (SEM) measurements. Lateral sizes of h-BN flakes deposited onto different substrates range from ~25nm - ~10 mm while thickness range from 1L to 10s of layers.

Note on volume, concentration, and solvent type: To reduce shipping costs, we ship supersaturated 2D solutions (~80-120 mg/L depending on the type of 2D layers). However, supersaturated solutions can be diluted to produce ~250-500mL of solution to deposit 2D layers onto desired substrates through simple and cost-effective spin-casting process. In our product, ethanol is used (and recommended) as the dispersant solvent owing to its environmental stability, thermal stability, dispersant properties, and non-contaminating nature. However, if your research needs other solvents, please feel free to contact us.


Specifications.

Identification. H-BN solutions created by delamination of h-BN crystals (grown by high pressure technique) through ultrasonication technique
Physical dimensions. 1 to 10 layers in thickness (thicker pieces might be observed depending on usage) and 10nm to 10 microns in lateral dimensions.
Smoothness. Atomically smooth surface with roughness < 0.35 nm.
Purity. 99.999% purity as determined by nano-SIMS measurements
Stability. High environmental and dispersant stability.
Crystallinity. Highly crystalline nanomaterials. No amorphous sheets, contaminants, or hidden secondary phases.
Dispersant solution. Ethanol is highly recommended though other solvents can be prepared on demand.
Support. 2Dsemiconductors USA is an American owned, regulated, and operated company. Our customers are well-protected by international as well as strict American customer laws and regulations. We give full technical support and guarantee your satisfaction with our well-established customer

Q1: Are these solutions good for catalytic measurements?

A: Yes, our 2D solutions are commonly used by catalysis community

Q2: What is the volume of the solution?

A: Each order can either contain 2mL of supersaturated monolayer solution (~200mg/L) or dense 20mL solutions (~20mg/L). We recommend using 2mL solutions as this will cut down the shipping charges and shipping times.

Q3: Are these 2D solutions consist of 100% monolayers?

A: This will depend on your requirements. We can design monolayer, few-layer, multi-layer, and even bulk layered solutions. Please identify what kind of solution (material type) you prefer to use during check out.

Q4: How about the solution types?

A: This will also depend on your application. We have capability to accommodate IPA, H2O, DMF, NMP, and many others. Just let us know what you have in mind.

 


产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
泰州巨纳新能源有限公司
  • 联系人:陈谷一
  • 地址:江苏省泰州市凤凰西路168号
  • 邮箱:taizhou@sunano.com.cn
  • 电话:021-56830191
联系我们

扫一扫以下二维码了解更多信息

销售微信咨询

网站二维码

版权所有©2024泰州巨纳新能源有限公司All Rights Reserved    备案号:苏ICP备17000059号-2    sitemap.xml    总访问量:58296
管理登陆    技术支持:化工仪器网